cabletrunking1 cabletrunking2 cabletrunking3 cabletrunking4

Cable Trunking

Many disasters especially fire could have been avoided if the proper cable trunking had been done in affected buildings. One of the most important safety precaution a building engineer must take note of is the proper installation of high quality electricity materials when erecting a house or building infrastructure. Sad news of houses, government and individual properties that have been razed down by fire outbreaks have been linked to the use of substandard building and electricity materials.

To forestall occurrences of such disasters, utmost care and professionalism must be displayed in the selection and the installation of needed materials. The passage way for cables and wires could be either surface type where the wires and cables visibly run along the edges and corners of the house or building or it could be conduit type, where the cables and wire run under protective cover in metal pipes or tubings in the wall.

Cable trunking is the encasing of wires in an enclosure which are then fixed to permanent positions in a building or house with a turnbuckle or a screw fix. Applying standard installation processes, the screw fix or turnbuckles are put in place without damaging the wires in their trunkings.

Cable trunking should be earthed between ends of bases and also between covers and bases. This is highly essential and achievable only when you use high quality materials. Where the environment is highly corrosive such as sewage treatment plants, it is highly recommended that you use materials that are galvanized, stainless steel or aluminum.

You can make use of epoxy coated cable trunking because they provide adequate protection against corrosion. To manufacture epoxy coated trunking, the coating process must take place over electrogalvanized sheet steel as this gives quality adhesion during epoxy coating process.

The advantages and benefits of using cable trunking especially the type that has the right quality and standard are known to some people already but you should read this if you don’t know already.

Advantages of cable trunking

  • Protection during fire outbreak

Even when due care and precaution are exercised, fire outbreaks may occur either at home, offices or factories. Many reasons could be responsible for this which could be a high discharge of electric current from main source, faulty electrical or electronic devices or oversight on the part of users. Whatever the reasons are, when there is a fire outbreak, the naked electric wires and cables facilitate a quick spread. When they are covered in safety panels, they spread is limited and the fire easily controlled.

  • Protection from electrocution

The naked wires and cables could be toyed with by small children and adults too can mistakenly touch or step on them and the result of such accidents which could be avoided are always distasteful. That is one of the reasons it is good for them to be housed in protective casings.

  • Protection from pilfering

When cables are left in the open, it could be pilfered or damaged by people who you may never be able to identify. It should therefore be on the top of your priority list that, the cables in your house or factory be duly protected.

  • Other accidents

When left dangling, accidents like tripping can occur around or within a building.

While trunking may not always be used to carry power cables, damage to any cable or wire that any trunking carries could disrupt the smooth and easy flow of work. Tracing this may not be fast or easy in the event of which a lot of time, energy and money could get wasted.

Begin to get security conscious and never compromise your high standard for quality materials when deciding to buy your cable trunking because it pays in the long run when you do so.